Blog Design Team Fancy Fold project created by Tracy Dennis

 

Double Diamond Fold Card

 

You will sure to impress with this Card. You can really have fun with mixing DSP and Embellishments.

Here are the Directions;

1-Card Base- 7" X 12". Score on the long side at 3", 4 1/2", 7 1/2", & 9" and with a pencil place a notch at 1 1/2", & 10 1/2" (rotate the piece and notch again at the same measurements). With the short side, place a notch at 3 1/2" (rotate the piece and notch again at the same measurement). Using a paper trimmer place the side notch and the end notch on the cut line and slice a diagonal line, repeat on the other side. Score a diagonal line from the corner notch to the inner scored line, repeat on the other side creating a cross  or "X". Then repeat this "X" on the other side of the piece. 

Your Score Lines should look like this....

2- Cut Panels= Cut 6 Pieces of DSP of various patterns at 2 3/4" X 6 3/4". (for the Pieces  on the ends that have the stamped images-  2 1/4" X 6 1/4", notch at 1 1/8" & 3 1/8").  *One for center panel-green DSP in the photo-no additional cutting

                            *Two are for the outer diamond panels-green DSP in the photo-( place notch on long side at 3 3/8" on both sides, then place notch on short side at 1 3/8" on both ends. cut a diagonal slice from notch to notch at both ends to create a diamond shape). 

                            *One is for the long half triangle panels -the cross striped DSP in the photo-( place notch on long side at 3 3/8" on both sides, then place notch on short side at 1 3/8" on both ends. cut a diagonal slice from notch to notch at both ends to create a diamond shape. Now cut this diamond in half creating 2 half diamonds). 

                            *Two are for small triangle panels-the floral DSP in photo-Cut each piece in half at 3 3/8"=4 pieces. With each piece notch at 1 3/8" at both ends- cut from notch to corner creating a triangle. Now place straight edge flush on the trimmer and cut in half=8 pieces. 

                            ** optional- create 4 more small triangles to be place on the back of card at the triangles that stick out of the card when folded flat (see last photo). 

       3. Embellish with stamped images, embellishments etc. 

When finished  & folded flat Card measures 6"x 7"

 

Supply List 

Lakeside Paper Pack

Tombow Dual Brush Markers & Blender

Vintage Photo Distress Ink

Versafine Ink

Fiscars Blocks

Cricut Trimmer

Scoreboard

Bone Folder

Tim Holtz Ruler

Art Glitter Glue

3D Foam Squares

MMI Thankful Thoughts Stamp Set

MMI Blessings Stamp Set

MMI Owlton & Owlivia Stamp Set 

I loved making this card and I hope you will too. Thanks for watching.

3d foam squaresArt glitter glueBlessings stamp setBlog design team challengeBlog design team projectsBone folderCreatealongwithtraceCricut trimmerDesign teamFancy fold cardsFancy fold challengeFiscars stamp blocksOwlton and owlivia stampPhotoplay lakeside paper packScoreboardThankful thoughts stamp setTim holtz rulerTracy dennisVersafineVintage photo distress ink

1 comment

Roberta Sharpe

Roberta Sharpe

Very pretty Tracy, so many details. Love the owl’s.

Leave a comment

All comments are moderated before being published