Menu
Cart 0 Wishlist 0

Mix & Match Card

Posted by Stacy Williams on

Hi everyone, Happy Wednesday to you.

I want to share a really fun and simple card with you today!

This is made using the Patina stamp set and the Wings stamp set for the greeting. The Patina stamp set, has no greeting on it, but it is loaded with all kinds of fun shapes and designs. It is great for making your own custom background paper like we did with this card.

Here are the supplies I used:

Blue Cardstock:

4 x 11 -score at 5.5, 4.5 x 2.25, 3.75 x 2, 3.75 x 1.75, 2.5 x 1.5

White Cardstock:

2 at 4 x 5.25, 4 3/8 x 2 1/8, 3 5/8 x 1 7/8, 3 5/8 x 1 7/8, 2 3/8 x 1 3/8
Optional: If you don't like working in eight's you can use:
4.25 x 2, 3.5 x 1.75, 3.5 x 1.5, 2.25 x 1.25

Patina Stamp Set

Wings Stamp Set

Art Glitter Glue

Foam Squares

Blue Ink Pad

Ribbon

Twine

Here is what I did:

Using blue ink and 1 of the (4 x 5.25) white pieces, stamp the ring all over from the stamp set. On the (4 3/8 x 2 1/8) white piece stamp the crosshairs with blue ink, on the (3 5/8 x 1 7/8) white, stamp the glob image, and on the (3 5/8 x 1 5/8) white, stamp the smaller paint glob--or use whatever images from the stamp set you like. Using the Art Glitter Glue, adhere all of these pieces to the appropriate blue layers. 

Glue the smaller layer to the white piece toward the bottom and on the right. Once glue down, wrap ribbon around the front of that (using tape on the backside to hold in place). Then glue the crosshair layer on top of that. Using foam squares on the glob image, adhere this to the front on top of the crosshair layer so it is off center. From the Wings stamp set, stamp the greeting on the smaller (1 3/8 x 2 3/8) white with blue ink. I used soar, dream and smile. Adhere this to the smaller blue layer. Attach this to the front of card using more foam squares. I also tied a knot with twine on the right side of the ribbon.

You can see the video here!

Hope all you have a Wonderful Wednesday. Hugs, Stacy ♥


Share this post



← Older Post Newer Post →


Leave a comment

Please note, comments must be approved before they are published.